Canature 475QC, Инструкция по установке и эксплуатации

Страница: 6 / 8

6
Installing Tubing Connections
With all components in place, complete final tubing connections using these guidelines:
 Tubing should follow contour of the cabinets
 Cut tubing to desired length using square cuts and proper cutting device
 Make no sharp bends
 Keep tubing from the post-filter to the faucet as short as practical for good flow.
 Leave enough tubing that the system can easily be pulled out from the cabinet for easy filter changes.
Procedure
1. Connect ¼” tubing from faucet to outlet of filter unit.
2. Connect ¼” tubing from inlet supply valve to inlet of filter unit.
3. Check all connections to be sure they are secure.
4. Turn on feed water valve and check for leaks. (turn off and correct leaks if leaks occur).
Flow Diagrams
INLET WATER
SUPPLY
FAUCET