6
3.
Parts
60010052
Transformer
1.
Control Valves
2.
Pressure Tanks
*Model 90 will get
Adaptors and the
O-rings shown
Note: Tanks come
preloaded with media
with the exception of
some larger systems
where the media will
come in containers.
This is due to weight
restrictions. Media will
need to be loaded
on site. See steps to
properly load media
contained in this
manual.
There are 4 red clips.
Please check to make sure
you have all of them.
60010004
Bypass
Parts Bag
60010006
Bypass Tool
92360
Grease
Packet
302171
Hose Clamps
60010016
Quick Connect
Adapters
18280
2 Upper Cones
HOW YOUR WATER SOFTENER WORKS
FEED WATER PARAMETERS
Maximum Iron**
= 2.0 ppm ferrous (clear water iron)
Maximum Hydrogen Sulfide
= 0.0 ppm
Maximum Manganese
= 0.75 ppm ferrous (clear water)
pH
= 6.5 to 8.5 with
no
iron or manganese present
pH
= 6.5 to 7.5 with iron or manganese present
**See System Maintenance Section - Resin Cleaner
Water softeners remove problem minerals (calcium and manganese) causing hardness, from your water by exchanging them with harmless sodium
ions in a process called ion exchange. Unlike calcium and magnesium, sodium does not form scaling. Sodium also does not interfere with the
cleaning action of soaps. Resin beads charged with sodium ions release the sodium and exchange them with the hardness ions. The resin beads and
the softener must be regenerated as these ions are exchanged and are used up.
Regeneration is accomplished by rinsing the resin with a saturated brine solution that removes the calcium and magnesium from the resin bead
while replenishing the sodium. This is why the softener requires a brine tank and salt. The water softener will provide soft water for several days
before needing to be regenerated when sized correctly for your application. Your system measures the amount of water used to determine when
regeneration is required.
The 85TA provides continuous soft water 24-7 so you will never have untreated water as one tank will regenerate independently off-line at the
factory preset time 2:00 a.m.
UNPACKING/INSPECTION
Be sure to check the entire unit for any shipping damage or parts loss. Also note damage to the shipping cartons. Contact the transportation
company for all damage and loss claims.
The manufacturer is not responsible for damages in transit
.
Small parts, needed to install the softener, are in the parts box. To avoid loss of the small parts, keep them in the parts bag until you are ready to
use them.
What is included?:
For Models:
Soft, 85TA-23-1D7B0, Soft, 85TA-30-1D7B0, Soft, 85TA-45-1D7B0,
Soft, 85TA-60-1D7B0, Soft, 85TA-90-1D7B0
1.
Lead Valve, Follower Valve
2.
2 Pressure Tanks
3.
Parts
4.
Manifolds with Ball valves
5.
Brine Tank Assembly
