2.Safety Instructions
.5.
Improper use may result in potential electric shock hazards or burns. This manual
contains important instructions that should be followed during installation and
maintenance. Please read these instructions carefully before use and keep them for
future reference.
1. Introduction
.4.
1.2 Packaging
When you receive the inverter, ensure that all the parts listed below are included:
2.2 General Safety Instructions
WARNING:
Electrical installations must be done in accordance with the local and national
electrical safety standards.
CAUTION:
CAUTION, RISK OF ELECTRIC SHOCK symbol indicates important safety
instructions, which if not correctly followed, could result in electric shock.
CAUTION:
CAUTION, HOT SURFACE symbol indicates safety instructions, which if not
correctly followed, could result in burns.
NOTE:
NOTE symbol indicates important safety instructions, which if not correctly
followed, could result in some damage or the destruction of the inverter.
2.1 Safety Symbols
Safety symbols used in this manual, which highlight potential safety risks and important
safety information, are listed as follows:
WARNING:
WARNING symbol indicates important safety instructions, which if not
correctly followed, could result in serious injury or death.
WARNING:
Please don’t connect PV array po) or negative(-) to ground, it could
cause serious damage to the inverter.
WARNING:
Only devices in compliance with SELV (EN 69050) may be connected to the
RS485 and USB interfaces.
WARNING:
Do not touch any inner live parts until 5 minutes after disconnection from
the utility grid and the PV input.
1
3
2
7
4
5
6
8
Part #
1
Description
PV grid tie inverter
2
Wall/pole bracket
3
Locking screws
Number
1
1
2
Table
1.1
Parts list
AC connector
4
1
WiFi
/
GPRS Stick
（
Optional
）
Manual
5
6
8
1
1
1
DC connector
1 pair for 0.7~3.0kW
2 pairs for 3.6kW
RJ45 connector
(Only for UK)
7
1
9
CT with cable
（
Optional
）