Subsection XX (STORAGE PROCEDURE)
vmr2012-007-001_a
TYPICAL
1. CVT cover
2. Exhaust system heat shield
3. CVT outlet
6. Block CVT outlet hose using a rag.
vmr2012-007-002_a
TYPICAL
1. CVT outlet hose
Exhaust System
Block muffler outlet using a rag to avoid intrusion
of small animals.
vmr2012-011-007_c
TYPICAL - RENEGADE MODEL ILLUSTRATED
1. Muffler
2. Block with rag here
ELECTRICAL SYSTEM
Battery Removal
Remove battery from ATV.
Store and charge battery as per battery manufac-
turer's recommendations.
DRIVE SYSTEM
Lubricate rear propeller shaft U-joints.
CHASSIS
Lubrication
Lubricate front and rear suspension.
Tire Pressure
Inflate tires to recommended pressure.
Vehicle Cleaning
Wash and dry the vehicle.
NOTICE
Never use a high pressure washer to
clean the vehicle. USE LOW PRESSURE ONLY
(such as a garden hose). The high pressure can
cause electrical or mechanical damages.
Remove any dirt or rust.
To clean plastic parts, use only flannel cloths and
XPS ATV Wash (P/N 219 701 702) or soapy water.
To clean vinyl parts, use only flannel cloths and a
mild non abrasive multipurpose cleaner.
2
vmr2012-006
