Can-Am outlander 400 series Скачать руководство пользователя страница 28

Страница: 28 / 156



WARNING

POTENTIAL HAZARD

Failure to inspect the vehicle before operating.

Failure to properly maintain the vehicle.

WHAT CAN HAPPEN

Increases the possibility of an accident or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your vehicle each time you use it to make sure the vehicle
is in safe operating condition.

Always follow the inspection and maintenance procedures and schedules
described further in this Operator's Guide.



WARNING

POTENTIAL HAZARD

Riding on frozen waterways.

WHAT CAN HAPPEN

Severe injury or death can result if the vehicle and/or operator and/or pas-
senger (2-UP models) break through the ice.

HOW TO AVOID THE HAZARD

Never ride this vehicle on a frozen surface before you are sure the ice is
thick enough and sound enough to support the vehicle and its load, as
well as the force that is created by a moving vehicle.

___________

SAFETY INFORMATION

___________

Содержание outlander 400 series





























































































































































Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды

Can-Am outlander 400 series, Руководство оператора

Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды