Can-Am outlander 400 series Скачать руководство пользователя страница 100

Страница: 100 / 156

Coolant Replacement

Refer to

MAINTENANCE

section.

Brake Fluid

Recommended Fluid

Always use brake fluid meeting the
specification DOT 4 only.

CAUTION: To avoid serious dam-
age to the braking system, do not
use fluids other than the recom-
mended one,

nor mix different

fluids for topping up.

Fluid Level

With vehicle on a level surface, check
brake fluid in reservoirs for proper lev-
el. They should be above MIN. mark.

Add fluid as required.

Do not overfill.

Clean filler cap before removing.

CAUTION: Use only DOT 4 brake
fluid from a sealed container. Do
not use brake fluid taken from old
or already opened containers.

NOTE:

A low level may indicate leaks

or worn brake pads. See an autho-
rized Can-Am ATV distributor/dealer.

Brake Lever Fluid Reservoir

Turn steering in the straight-ahead
position to ensure reservoir is level.
Check the brake fluid level, the reser-
voir is full when the fluid reaches of
the top of window.

Visually inspect lever boot condition.
Check for cracks, tears, etc. Replace
if damaged.

V07I02Z

TYPICAL

Brake Pedal Fluid Reservoir

V07A0CY

TYPICAL

Battery

This vehicle is equipped with a dry
type battery that requires no mainte-
nance.

Refer to

MAINTENANCE

to removal/

installation instructions.

While reading this Operator’s Guide, remember that:



WARNING

Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.

______________________

Содержание outlander 400 series





























































































































































Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды

Can-Am outlander 400 series, Руководство оператора

Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды