Can-Am outlander 400 series Скачать руководство пользователя страница 110

Страница: 110 / 156

ENGINE BACKFIRE

1. Exhaust system leakage.

–

Contact an authorized Can-Am ATV distributor/dealer.

2. Engine is running too hot.

–

See

ENGINE LACKS ACCELERATION OR POWER

3. Ignition timing is incorrect or there is an ignition system failure.

–

Contact an authorized Can-Am ATV distributor/dealer.

4. Improper carburetor setting.

–

Contact an authorized Can-Am ATV distributor/dealer.

ENGINE MISFIRE

1. Fouled/damaged/worn spark plug.

–

Clean/verify spark plug and heat range. Replace as required.

2. Water in fuel.

–

Drain fuel system and refill with fresh fuel.

VEHICLE CANNOT REACH FULL SPEED

1. Engine.

–

See

ENGINE LACKS ACCELERATION OR POWER

2. Parking brake.

–

Ensure brake lever lock is completely removed.

3. Air filter/housing plugged or dirty.

–

Check air filter and clean if necessary.

–

Check deposits in air filter housing drain.

–

Check the position of the air intake tube.

4. CVT dirty or worn-out.

–

Contact an authorized Can-Am ATV distributor/dealer.

TRANSMISSION LEVER IS HARD TO MOVE

1. Transmission gears are in a position that prevents the transmission lever

to work.

–

Rock the vehicle back and forth to move the gears in the transmission and
allow the transmission lever to be set.

2. Engine idle speed is set too high.

–

Adjust the idle speed. Refer to the

SPECIFICATIONS

3. CVT dirty or wear.

–

Contact an authorized Can-Am ATV distributor/dealer.

108

_____________________

Содержание outlander 400 series





























































































































































Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды

Can-Am outlander 400 series, Руководство оператора

Результаты поиска

Содержание outlander 400 series

Отзывы:

Похожие инструкции для outlander 400 series

Бренды по названию

Популярные бренды