Camtek CAM1095 Скачать руководство пользователя страница 11

11

Inspection Camera Kit 22mm

CAM1095

Fast Forwarding and Rewinding

• 

You  can  use  [►]  or  [◄]  button  on  the  remote 

control to fast forwarding or rewinding (1x, 2x, 

4x, or 8x, speed). Always press[►/ENT] button 

to go back to normal playing.

Video Software Installation (may be required 
for older computers)

•  Generally, the recorded videos can be played 

on any computer purchased after the year 2006. 

If you cannot open the recorded document on 

computer this mean your computer does not 

have the correct media player with the required 

codecs to play the file.  

•  Go to the website: 

https://kmplayer.en.softon

-

ic.com

 and download “KMPlayer” software for 

free.

• 

Please use this player to play the video files from 

the device.

IMPORTANT MESSAGE: Do not overcharge the 

battery! Overcharging can result in acid leakag-

es and cause damage to the battery and com-

ponents   

Recharging the Battery

•  Plug the charger into the AC socket on the wall 

and insert the other end into the DC Jack on the 

battery box.

•  The battery can be charged while the battery 

box is on and the device is being used. Howev-

er, once the power in the battery runs completely 

out, it can only be charged when the battery box 

is turned off. 

•  The charge LED will be red during the process 

of charging and will turn green when charging is 

finished (normal charging time: 5 – 6 hours).

Record Interface and Video Record Mode

File Selection and Playback

•  When you enter “play video” mode, the set will 

display all the available video files on the screen.

• 

You can use [▲] or [▼] button to select desired 

video and press [►/ENT] button to play.

• 

Press and hold [▲] or [▼] button to go to previ

-

ous or next video.

• 

Use [►/ENT] button to start or pause the play

-

ing. Use [■/exit] button to stop or go back to pre

-

vious menu.

•  The screen will display “loading, please wait …” 

for a few seconds before playing videos.

Compatible Video Format

•  Divx4/Divx5/MPEG1/MPEG2/MPEG4 

(MPEG4  video  file  format:  .avi,.m4v,  .MPG, 

MPEG, .VOB)     Note: The video player of 

the device may not support some download-

ed videos. 

WARNING

Содержание CAM1095

















Отзывы: