HSEUREG04801(R2) MANUAL
Connections
Clamping Yoke Connector Specifications
Input / Output connections
Optional Signal connections plugs
Tightening torque min. – max.
1,2 – 2,2Nm (blade 1,0x5,5 DIN5264 )
0,4 – 0,5Nm (blade 0,6x3,5 PH1 PZ1)
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged
Not applicable
Clamping range, min. – max.
0,5 – 16mm² / AWG26 – AWG6
0,2 – 4,0mm² / AWG26 – AWG12
Solid, H05(07) V-U min. – max.
0,5 – 16mm²
0,2 – 4,0mm²
Stranded, H05(07) V-U min. – max.
6 – 16mm²
Not applicable
Flexible, H05(07) V-U min. – max.
0,5 – 16mm²
0,2 – 4,0mm²
w. plastic collar ferrule, DIN 46228 pt 4 min. – max.
2,5 – 10mm²
0,2 – 2,5mm²
w. wire end ferrule, DIN 46228 pt 1, min. – max.
2,5 – 10mm²
0,2 – 4,0mm²
Plug gauge in accordance with EN 60999 a x b; ø
5,4 x 5,1mm; 5,3mm
2,8 x 2,4mm; 2,5mm
Pitch (P)
10,16mm
5,08mm
Wire Stripping Length (fine wired)
Nominal Cross Section
Wire End Ferrule
Stripping Length
Wire End Ferrule
Stripping Length
0,25mm²
H0,25/5
5mm
H0,25/10 HBL
8mm
0,5mm²
H0,5/6
6mm
H0,5/12 OR
8mm
1,0mm²
H1,0/6
6mm
H1,0/12 GE
8mm
2,5mm²
H2,5/12
12mm
H2,5/19D BL
14mm
4,0mm²
H4,0/12
12mm
H4,0/20 GDR
14mm
6,0mm²
H6,0/20
12mm
H6,0/20 SW
14mm
10,0mm²
H10,0/12
12mm
H10,0/22 EB
15mm
The length of ferrules is to be chosen depending on the rated voltage. The outside diameter of the plastic collar should not be larger than
the pitch (P)
Ordering Information
Ordering Codes
Product Code
Information
Article Number
HSEUREG04801.015(R2)
0-18Vdc
3041051001CA
HSEUREG04801.030(R2)
0-30Vdc
3041051002CA
HSEUREG04801.050(R2)
0-50Vdc
3041051003CA
HSEUREG04801.090(R2)
0-90Vdc
3041051004CA
HSEUREG04801.130(R2)
0-130Vdc
3041051005CA
HSEUREG04801.180(R2)
0-180Vdc
3041051006CA
Certificate Calibration
Separate works certificate manufacturer calibration of the power supply
-
Back Plate Kit
Hart mount plate kit including screws
2201002001CA
Optional Interface Connectors
Optional 2poles Clamping Yoke Connector 180° cabling (10pcs per pack)
3520037
www.powersolve.co.uk
020321
