Camsat iCAM-Mobile HD II, Руководство пользователя

Страница: 39 / 44

8.3. IP camera connector – How to crimp patch cable without
PoE (48V)
The RJ45 connector for camera connection can be used to configure the recorder and ra-
dio module if it is not possible to establish a wireless connection and you must connect
to Camera Port with PoE output.
The connector always has passive 48V PoE power supply, in order to connect devices
that do not use PoE 48V power, it is recommended to make a twisted pair without
4-5, 7-8 pairs (blue, white-blue, brown, white-brown).
8.4. Troubleshooting
A) Problem with establishing a wireless connection
If, despite the configuration, there is a problem with the connection between devices, for
example devices can not be seen, the modules must be reset and the configuration must
be carried out from the beginning. For a description of resetting the modules to factory
settings, see section 4. Factory settings and reset.
B) Time on recordings is incorrect
If during the playback of the recordings, the date or time of the recording does not match
the recording, the recorder's system time should be set. The date must be entered in the
menu
Configuration> Recorder> Information or synchronize it automatically. Changing
the system time back will result in overwriting of the latest recordings with new ones.
It is possible to automatically change the time for summer time in the menu
Configura-
tion> Recorder> Set. summer time . An example of the summer time configuration:
C) Change of the computer's IP address
Page 39