Camsat iCAM-Mobile HD II, Руководство пользователя

Страница: 15 / 44

a) The basic operating mode of the thermostat is the "winter" mode - enabled when pins
1 with 2 and 5 with 6 are combined.
In this mode the device can work in winter conditions, i.e. when
the temperature drops to -20°C
Description:
When iCAM-Mobile is turned on when the whole device is cooled
down to -20°C, the system will not allow to turn on the recorder
until the HDD reaches a temperature of about 9-10°C.
When powered from 230V or from an alternative 24V supply, the time needed to start the
recorder is no more than 10 minutes.
From the moment the recorder is turned on, the system will maintain the HDD temperatu-
re not lower than +2°C
b) The second mode is the "summer" mode set when pins 2 with 3 and 4 with 5 are com-
bined.
In this mode the device can work when it is certain that the we-
ather temperature will not fall below 0°C
Description:
Regardless of the outdoor temperature, the device will not main-
tain the minimum HDD temperature and the temperature will de-
pend on the outdoor temperature.
Regardless of the temperature and method of power supply in this mode, the recorder
will be started no later than after 1 minute.
Setting the device in this mode may extend the battery life.
c) Intermediate mode "I" (not recommended) is set when pins 1 with 2 and 4 with 5 are
combined. Description:
In this mode, the system will maintain the HDD temperature not lower than +2°C.
Regardless of the temperature and method of power supply in this mode, the recorder
will be started no later than after 1 minute.
d) Intermediate mode "II" (not recommended) is set when pins 2 with 3 and 5 with 6 are
combined. Description:
Regardless of the outdoor temperature, the device will not maintain the minimum HDD
temperature and the temperature will depend on the outdoor temperature.
In this mode, the system will not allow to turn on the recorder until the HDD reaches a
temperature of about 9-10oC. When the disk sleep temperature below 0oC, the system
will turn off the disk and the recorder.
Any other jumper setting is not allowed.
Page 15