10
GB
TROUBLE SHOOTING
Cartridge would not install
No gas supply in (
) posi
-
tion
Smell gas in “
l
” position
Low flame
Uneven flame
No ignition/Faulty
ignition
Extinction in operation
Trouble shooting
Ignition knob is not turn to “
l
” position
P
Turn ignition knob completely to
“
l
” and reset cartridge.
Safety device activated
P
P
P
Refer to explanation for safety
device.
Ignition knob malfunction
P
P
P
P
Contact local agent to repair.
Clogged nozzle
P
P
P
Contact local agent to repair.
Cartridge incorrectly installed
P
P
P
P
Fit cartridge guide into cartridge
slot.
Clogged burner holes
P
P
P
Use a metal brush to clean it.
Empty cartridge
P
P
P
P
Refer to explanation for changing
the cartridge.
Troubles
Causes
G - TROUBLE SHOOTING
F - CLEANING AND STORAGE
Once your stove has fully cooled:
1 - Cleaning
Main stove
- Clean the stove having removed the cartridge.
- Clean the pan support (4) and the cartridge exterior
and cover (3) with warm water, then dry with a cloth.
Burner (5)
A dirty burner will clog the holes of the flame.
- Clean the flame holes of burner head with a metal
brush.
Piezo ignition electrode (6)
If the electrode gets wet, the stove will not light. Make
sure any water is removed, and dry with a cloth.
Stainless Steel:
Stainless steel is known for its ability to resist corrosion
and rust. However, dirt, dust, grime and non-appropriate
cleaners put stainless steel at risk for corrosion and
rust. Stainless steel responds well to cleaning as long
as certain rules are followed
DO :
y
Read carefully the instructions on the cleaning
products and make sure it’s appropriate for stainless
steel. Ideally, use specific stainless steel cleaners.
Pay special attention to some of them which can be
inappropriate for paints, these look like aluminium
or stainless steel and can erase markings.
y
Use a safe, non-abrasive sponge. Brush in the
direction of the grain of the metal.
y
Rinse thoroughly.
y
Always dry the surface with a soft towel or cloth. A
microfibre towel is preferable.
DON’T :
y
Never leave wet sponges, cloths, or cleaning pads
on the Stainless steel surface.
y
Never leave solutions of chlorine bleach and water
on your Stainless steel surface. Chlorides, which
are found in most soaps, detergents, bleaches, and
cleansers, are very aggressive to stainless steel.
y
Never use oven cleaners that contain caustic
chemicals.
y
Do not use paper towel or scratch-sponges.
2 - Storage and transportation
- Check that the lever (2) is in the UNLOCK position
(Fig. 10).
- Always remove the gas cartridge from the stove
during storage or transportation.
- Store the stove and the cartridge in a cool, dry and
well-ventilated area, out of reach of children. Never
store in a basement or cellar.
