4. Click the GOES Radio sub tab (
(p. 3)).
FIGURE 4-1. Device Configuration Utility GOES Radio screen
5. Select Enabled from the Goes Radio Enabled field.
6. Select the Com Port to which the GOES radio is connected.
7. Type the Self-timed Message Windows (in seconds) as assigned by the GOES DCS Program.
8. Type the Platform ID (in HEX) as assigned by the GOES DCS Program.
9. Select the Random Transmission Baud Rate as assigned by the GOES DCS Program.
10. Type the Random Transmission Channel as assigned by the GOES DCS Program.
11. Select the Self-Time Baud Rate as assigned by the GOES DCS Program.
TX325 Satellite Transmitter for GOES V2
3