These websites provide the raw data sent through the GOES satellite system but do not require a
login, user name, nor password.
1. Type your eight-character DCP ADDRESS.
2. Type the number of hours you want the field test system to go back to.
3. Click RETRIEVE.
The PDT INFORMATION provides your assigned DCP address, channels, transmission times, and
window length. Make sure your setting in your DCP match this information. Failure to do so will
result in loss of data and transmitting over the top of other DCP scheduled slots and also will
result in the loss of other user’s data.
The bottom table shows information that can help you determine the health of the DCP
transmissions. This information includes signal quality (QUAL), transmission start time (CARRIER),
and stop time(END).
TX325 Satellite Transmitter for GOES V2
21
