![background image](http://html1.mh-extra.com/html/campbell/sr50at/sr50at_instruction-manual_488987080.webp)
Appendix F. SR50ATH Heater Operation
F-2
FIGURE F-1. SR50ATH Heater Option
F.2 Heater Maintenance
Most of the maintenance is the same as the maintenance for the standard
Maintenance and Troubleshooting
(p. 16)
). However, the
transducer and desiccant replacement is slightly different for the SR50ATH.
When ordering replacement transducers, ensure that the Replacement
Transducer Maintenance Kit (pn
#
32571) is ordered.
The procedure to disassemble the SR50ATH for desiccant replacement or
transducer replacement is as follows:
1.
Remove the six Phillips screws on the outermost hole pattern.
The screws used on the SR50AT have changed from the slotted
type to Phillips.
NOTE