7. Determine the correct mounting angle for the location. Adjust the support strut length
(blue arrows in
(p. 16)) or change the mounting location of the support struts
on the mount arms (yellow arrows in
(p. 16)) to set the mount to the proper
angle. Refer to
(p. 19) for correct angles and mount adjustments. For
tower assembly, the lower mount bracket position may be adjusted up or down if needed.
Fully tighten all the nuts and bolts used in the mount assembly.
FIGURE 3-14. Adjusting the mount angle
SP50-L, SP90-L, and SP305-L Solar Panels
16
