Campbell SDM-INT8, Инструкция по эксплуатации

Страница: 30 / 41

SDM-INT8 8 Channel Interval Timer
*Table 1 Programs
01: .125
Sec. Execution interval
1: If Flag/Port (P91)
1: 21
Do if flag 1 is low
2: 0 Go to end of Program Table
2: Do (P86)
1: 10
Set high Flag 0 (output)
3: Set Active Storage Area (P80)
1: 1
Final Storage Area 1
2: 5 Array ID or location
4: SDM-INT8 (P101)
1: 00
Address Option
2: 0000 Chan4321=HLrise/ HLfall/HLrise/HLrise/
4: 0002 Chan8765=none/none/none/kHz/
5: 2220 Chan4321=kHz/kHz/kHz/none/
6: 1-- Edges of Chan 1 in events mode
7: 1 Loc : (ignored in events mode)
8: 1 Mult
9: 0 Offset
5: Burst Measurement (P23)
1: 4
Reps
2: 12 7.5 mV fast Range
3: 1 IN Chan
4: 2100 TrigINchanSetC1/AboveLim/INpStr/Diff
5: 10 Time per (ms.)
6: .2 Scans ( in thousands )
7: 0 Samples before Trigger
8: 10 mV Limit
9: 0 mV Excitation
10: 1 Loc :
11: 1 Mult
12: 0 Offset
6: Do (P86)
1: 71
Pulse Port 1
7: Do (P86)
1: 10
Set high Flag 0 ( output )
8: Set Active Storage Area (P80)
1: 1
Final Storage Area 1
2: 9 Array ID or location
9: Real Time (P77)
1: 11
Hour-Minute,Seconds
10: Do (P86)
1: 10
Set high Flag 0 ( output )
25