Campbell PC208, Инструкция по эксплуатации

Страница: 76 / 133

SECTION 5. TELCOM
5-2
TABLE 5-1. Files Created and Used by TELCOM
FILE EXTENSION DESCRIPTION
name.STN STatioN file, describes link, polling frequency, and format to store data
on disk. A station file is also used for DOS commands.
name.DAT DATa file containing the data for the station with the same name.
name.ERR ERRor file contains communications or datalogger errors for station
with the same name.
name.CQR Communications Quality Report for station with the same name,
created only for stations accessed via a RF link. Refer to RF95
Manual, Section 3.1.7.3.
name.SCR SCRipt file, the "script" to be followed by TELCOM is a list of station
files containing the stations to call and the commands to execute.
5.1. STATION PARAMETERS
To edit the station parameters, run TELCOM by
typing 'TELCOM' on the command line and
pressing the carriage return. (The file
TELCOM.EXE must be on the default drive and
directory or the path specified.) The screen will
display:
Telecommunications Program ver. X.X
Copyright (C) 1986, 1991 Campbell Scientific, Inc.
Options which may be entered following the station or script file name:
/E = Edit parameters /B size = Specify Block Size
/C = Call datalogger now /G = Get all data from datalogger
/W = Wait for wake up time /D = unattended Done
/A port = Answer modem ring /F name = alternate data file
/L loc = collect from Location
To end, press Enter key without a file name
Enter station or script file name:
Enter the name you wish to use for the station.
The name is used for data, station, and error
files and is limited by the rules that apply for all
file names. The drive and directory path
specification (see PC-DOS manual) must
precede the station name if the data, error, and
station files are to exist on a drive or directory
other than the default (e.g., 'B:name' or
'C:[path]name'). The /E option must follow the
name if the file already exists; otherwise, TELCOM will simply call the station (if it is time
to do so).
The options which may be entered with the
station or script file name are described in
Section 5.2.
Once the station name (say for example
MTNTOP) has been entered, TELCOM will
prompt for the station parameters: