LWS Dielectric Leaf Wetness Sensor
2
. It is included in installations of
LoggerNet
,
PC200W
,
PC400
, or
RTDAQ
.
The following procedure also describes programming with
Short Cut
.
1.
Open
Short Cut
and click
Create
New Program
.
2.
Double-click the data logger model.
3.
In the
Available Sensors and Devices
box, type LWS. You can also
locate the sensor in
Sensors
|
Miscellaneous Sensors
folder. Double-click
LWS Dielectric Leaf Wetness Sensor
. Enter the
Dry threshold (mV) <
and
Wet threshold (mV) >=
(p. 7)
, for information about determining the dry threshold and wet threshold
values).
4.
Click on the
Wiring
tab to see how the sensor is to be wired to the data
logger. Click
OK
after wiring the sensor.
5.
Repeat steps three and four for other sensors. Click
Next
.