CM106B Tripod
2
2. Precautions
•
section at the front of this
manual.
•
WARNING — Ensure structural integrity during setup and weather
extremes to minimize the chance of damaging the tripod or instruments.
Read all instructions carefully. Once the tripod is in full vertical position,
securely fasten it to the ground using ground spikes.
•
WARNING — For installations where soil structure is questionable or the
tripod may experience high wind loads, concrete footings for the tripod
feet and guy anchors should be considered.
•
Keep the bottom of the tripod legs free of soil, ice, and debris to prevent
trapping any moisture inside or around the legs.
3. Initial Inspection
3.1 Inspect Packaging
Upon receiving the CM106B, inspect the packaging and contents for damage.
Claims for shipping damage must be filed with the shipping company.
Locate the packing slip for the order and compare the items listed on the
packing slip to the items that were actually shipped. Report any discrepancies
to Campbell Scientific.
3.2 Tripod Components
shows the tripod components. The tripod base is packaged with
the mast, mast extension, ground rod, lightning rod, and (6) stakes. The ground
rod clamp, lightning rod clamp, cable ties, and ground wires are enclosed in a
bag. The optional guy kit is packaged separately.
