CM106B Tripod
9
FIGURE 6-4. Mast attachment to tripod base
Loosen the six bolts on the tripod base. FIGURE
of these bolts. The remaining bolts are in the same position on the third tripod
leg. Slide the mast into the tripod base, making sure that it extends below the
lower bolts and rests on the tabs. Tighten the six bolts to secure the mast.
Plumb the tripod by adjusting the northeast and south facing legs. With a level
on the East side of the mast, adjust the Northeast leg for plumb. With the level
on the South side of the mast, adjust the South leg for plumb. Tighten the
tension bolts after the adjustments have been made.
Mast
Tab
Bolts
Preset at Factory
Preset at Factory
