Campbell CCFC Field Camera, Инструкция по эксплуатации

Страница: 29 / 127

CCFC Field Camera
15
Figure 7-2 Photo Collection from Installed Camera Memory
Alternatively, an FTP client such as FileZilla ( https://filezilla-
project.org/ ) can be used to batch download multiple files at once.
It is recommended to set the timeout in FileZilla to 0 (unlimited).
7.4 Modem Power Control
Modem Power Control controls the power for a communication
device. One common application is to have the camera control the
power to a communication modem at a solar powered site. Refer
to Section 12.8.4.5.1
Modem Power Control for configuration
details via the web interface.
This power management feature can greatly reduce the system
power requirements by only turning on the modem when required
to transmit a photo or video. The
Modem Power Control will turn
on under the following conditions:

The camera is in one of its low power modes and the Setup
Button is pressed. The camera will exit the low power mode
and stay awake for 5 minutes with the switched power output
on.

A capture event has occurred where communications are
required including FTP or Email transfers. Events requiring
camera memory storage will not turn on the switched power
output, as these events do not require a modem for
communications. It takes the camera approximately 90 secs to
boot up after power is applied; immediately thereafter, the
camera can capture and transfer files.
7.5 Lens
The CCFC lens contains the following features:

Electronic zoom