Campbell CCFC Field Camera, Инструкция по эксплуатации

Страница: 18 / 127

CCFC Field Camera
4
For RS-232: The maximum recommended cable
length at 115.2 K BAUD rate is 15 m. The use of the
57.6 KBAUD rate has a recommended maximum
cable
length of 30 m (90 ft).
For RS-485: A user-supplied (twisted pair) cable
could be spliced onto the communication wires to
extend to a maximum cable length of 305 m (1000 ft).
Power wires still need to be kept to the 20 m (65 ft)
factory length (or 0.7 Ohm user-supplied spliced
cable) limit.
Camera Memory

File Type : jpeg (photo) ; avi (video)

Size: 16 GB
Zoom

18x Optical zoom
3. Initial Inspection

Upon receipt of the CCFC, inspect the packaging and contents
for damage. File any damage claims with the shipping
company. Immediately check package contents against the
shipping documentation. Contact Campbell Scientific about
any discrepancies.

The model number and cable length are printed on a label at
the connection end of the cable (if a cable was purchased).
Check this information against the shipping documents to
ensure the expected product and cable length are received.

The CCFC is shipped with a Quick Start Guide, 2 screws, 2
lock washers, 2 flat washers, 4 Lens wipes, a ResourceDVD,
and the Female DB9 to Terminal block adaptor (L28840).
4. Quick Notes
4.1 CCFC General

When ordering the CCFC series, use the model numbers
CCFC RS2332 or CCFC RS485 (see Sections 13
RS-232
Communications and Section 14 RS-485
Communications ).

The
Setup Button’s
Status LED will flash when the
camera is in an Active Power State.
Note