![background image](http://html1.mh-extra.com/html/campbell/9522b/9522b_instruction-manual_489307027.webp)
9522B Iridium Satellite Modem and COM9522B Interface Modem
17
5.1.6 Step 6: CR1000 Configuration
Select your datalogger as shown in FIGURE
5-6
. Be sure that the
Communications Enabled
box is checked and that the
PakBus Address
is
correct for the datalogger being used. Set the
Delay Hangup
to
200 ms
.
FIGURE 5-6. CR1000 Hardware Configuration
Select the
Schedule
tab and configure the
Collection Interval
as required for
your application. Be sure that the
Scheduled Collection Enabled
box is
checked. FIGURE
5-7
shows an example of a daily scheduled data collection
that is to start at 1:00pm. The number of retries and the retry interval are left in
their default state in the example. These values should be adjusted as required.
Once all configurations are complete, click the
Apply
button in the lower left
hand corner. The station is now set up in
LoggerNet
.
Содержание 9522B
