![background image](http://html1.mh-extra.com/html/campbell/110pv/110pv_product-manual_3773124014.webp)
6. In Output Setup, type the scan rate, a meaningful table name, and the Data Output
Storage Interval.
7. Select the measurement and its associated output option.
8. Click Finish and save the program. Send the program just created to the data logger if the
data logger is connected to the computer.
9. If the sensor is connected to the data logger, check the output of the sensor in the data
logger support software data display in LoggerNet, RTDAQ, PC400, or PC200W to make
sure it is making reasonable measurements.
110PV Surface Temperature Probe
4