3. In the Available Sensors and Devices box, type 110PV. You can also locate the sensor in the
Sensors > Temperature folder. Double-click 110PV. The surface temperature defaults to
degree C. This can be changed by clicking the Temperature box and selecting one of the
other options. Enter the Cable Resistance. This value is unique for each 110PV, and is
printed on the heat shrink label attached to the sensor cable.
4. Click on the Wiring tab to see how the sensor is to be wired to the data logger. Short Cut
uses a 3-wire half bridge measurement, and therefore doesn’t use the blue, green, and
white wires. The wiring diagram can be printed now or after more sensors are added. Click
OK after wiring the sensor.
5. Repeat steps three and four for other sensors you want to measure. Click Next.
110PV Surface Temperature Probe
3