General Power Tool
Safety Warnings
(Cont’d.)
Prevent
uninten-
tional starting. Ensure the switch is in
the off-position before connecting to
power source and/or battery pack, pick-
ing up or carrying the tool. Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents.
Remove
any
adjusting key or wrench before turning
the power tool on. A wrench or a key
left attached to a rotating part of the
power tool may result in personal
injury.
Do not overreach. Keep prop-
er footing and balance at all
times. This enables better
control of the power tool in unexpect-
ed situations.
Dress
properly.
Do not wear loose clothing or jew-
ellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be
caught in moving parts.
If devices
are pro-
vided for the connection of dust
extraction and collection facilities,
ensure these are connected and proper-
ly used. Use of dust collection can
reduce dust-related hazards.
Do not
misuse
this product. Excessive exposure to
vibration, work in awkward positions,
and repetitive work motions can cause
injury to hands and arms. Stop using
any tool if discomfort, numbness, tin-
gling, or pain occur, and consult a
physician.
1. Wear ear protectors with
impact drills. Exposure to
noise can cause hearing
loss.
2. Use auxillary handle supplied with
the tool. Loss of control can cause
personal injury.
3. Always work in a well-
ventilated area. Wear an
OSHA-approved dust
mask and safety glasses.
4. Keep hands away from rotating parts.
5. Use clamps or another practical way
to secure the workpiece to a stable
platform. Never hold work in your
hand, lap, or against other parts of
your body when operating tool.
TOOL USE AND CARE
Do not
force the
power tool. Use the correct power tool
for your application. The correct power
tool will do the job better and safer at
the rate for which it was designed.
Do not
use the
power tool if the switch does not turn
it on and off. Any power tool that can-
not be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
Store
idle
power tools out of the reach of chil-
dren and do not allow persons unfamil-
iar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
Maintain
power
tools. Check for misalignment or bind-
ing of moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation. If
damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained power
tools.
Keep
cutting
tools sharp and clean. Properly main-
tained cutting tools with sharp cutting
edges are less likely to bind and are
easier to control.
Use the
power
tool, accessories and tool bits etc. in
accordance with these instructions,
taking into account the working condi-
tions and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
1. This tool must NOT be modified or
used for any application other than
that for which it was designed.
3
www.chpower.com
DG190600CK and DG190625DI
1
2
3
4
5
1. Side handle
2. Depth gauge
3. Clamping lever
4. Hammer/Drill lever
5. Lock button
6. Switch
7. Forward/Reverse lever
8. Chuck
9. Power cord
10. Chuck key holder
6
7
8
8
Tool Features
2
9
10
