Page 3
QUICKSTART GUIDE
1
Electrical requirements : 208 V / 220-240 V
Install a 2 in. x 3 in. wall junction box, positioned within the space defined by the
wall bracket. Lowest fixing hole of wall bracket should be at 32 cm (12
1/2
”) from
the floor (page 6 Fig. B).
Installing and connecting the heater :
(pages 4-7).
To turn the heater ON :
Press the ON/Standby key
(page 8).
To set the temperature :
Turn the Temperature adjustment knob
to raise or to
lower the temperature setting (page 8).
To change from °C to °F :
(page 9)
To change Mode :
Press the Mode key
(Comfort > Economy > Frost protection
> Program > Comfort >... (pages 9-10).
To lock or unlock the control panel :
Press and hold the Window key
and the
Temperature adjustment knob
at the same time (page 11).
Troubleshooting :
(page 16).
To contact CONVECTAIR :
(Back Cover).
“ON” indicator light “Open Window” Activate/Deactivate key
Temperature adjustment knob
Heating indicator light
Operating mode display
Operating mode selection key
“ON/Stanby” key