40
Roof Fan
To open the roof vent, turn the opening knob. This will raise the vent top.
The vent must be open for the fan to operate.
The Fantastic Vent
TM
fan has three controls: Direction, Speed, and
Thermostat.
Direction:
Select whether you want the fan to blow outward or
inward.
If you want to reverse direction, turn the fan off, and let it
come to a complete stop before reversing switch and restarting.
Speed Control:
Turn on to the desired speed.
Thermostat:
The thermostat may be adjusted to automatically turn
the fan OFF if the temperature drops or to turn the fan ON if the
temperature increases.
The fan will turn OFF automatically when you lower the vent lid.
IF the fan does not turn ON, you must make sure:
1.
The vent is open far enough to release the switch
2.
The Direction switch is selected IN or OUT
3.
The Speed knob is turned to 1, 2, or 3
4.
AND - That the Thermostat is set high enough.
The vent should be closed during travel. Always close the vent fully
during inclement weather.
Rain Sensor Fantastic Vent
TM
This option has an automatic
closing feature when the fan detects rain.
For Rain Sensor to operate, the Speed Control must be set on 1,2 or 3.
If you set the Speed Control to “0”, the Rain Sensor WILL NOT
FUNCTION to automatically close the lid!
NOTE: If you want the Rain Sensor to function with the
vent open
and
the
fan off
, set the Speed Control on 1,2 or 3 and the In/Out switch to the
middle (Off) position.
To open the vent, push the Vent Open Switch (near the Opening knob).
To stop the vent cover part-way open:
As the vent is
opening
, grab the
Opening knob and hold it until the vent cover stops.
DO NOT grab the
Opening knob when the vent cover is CLOSING.
In case of power failure, close manually by rotating the Opening knob.
When traveling, make sure the Vent Open Switch is set to ―Close‖ OR
set the speed knob to ―0‖ to prevent automatic opening while driving.
