23
Operating Xenon Lights
The xenon lights (chrome, Ultra) have a dimmer and a three-position
switch to toggle between white and red light. The red light will help
keep your night vision by leaving your pupils dilated.
The xenon light can be turned off TWO ways:
1. Rotating the dimmer switch all the way down until it clicks.
2. Putting the red/white toggle switch in the middle position.
If the light fails to turn ON, try both switches. All the cabin lights are on
the same fuse. If any one of the cabin lights work, the fuse is good.
Replacing Light Bulbs
Standard Kitchen/Cabin Lights
- Remove the plastic lens on the
light by squeezing it slightly. Remove the lights by pushing in and
rotating. Replace with a bulb of the same number.
Xenon Lights
-
Remove the three screws holding the lens. Remove
the lens carefully (it is glass). Pull the light bulb out. Replace the bulb
with the same size and type. Use a clean cloth or paper towel to hold the
new bulb when replacing.
Do not touch the new bulb with your
fingers.
Oils on your hands will reduce the bulb life.
Tail Lights
-
Using a small screwdriver, gently pry the light module
out of the black rubber trim ring. Unplug the connector from the back of
the light module. Replace with a new light module. Carefully push the
light module back into the rubber trim ring. (The bulb inside the module
can not be replaced.)
Side Marker Lights
- Remove the screw holding the colored lens.
Push in and twist the bulb to remove. Install a new bulb with the same
number. Replace lens.
Location
Incandescent
LED
Side Marker, Red (Aluminum Base)
#57
BA9s *
Side Marker, Amber (Aluminum Base)
#57
BA9s *
Side Marker, All (Rubber Base)
#67
License Plate
#67
Back-Up/Flood Light
Camp-Inn*
Tail Light
6‖ Oval Module*
Incandescent
Xenon
Kitch-Cabin Light White
#1141
10XE/12*
Kitch-Cabin Light Red
10XE/12R*
*LED & Xenon bulbs available from Camp-Inn Online Store
Incandescent bulbs and 6‖ Oval Modules available at auto parts stores
