Operation and maintenance instructions
Series PRE proportional pressure regulator
External sensor version
5000056022
Ver. 00
6
The analog version with external sensor of the Series PRE electronic pressure regulator is
available with two different command signal types:
•
Analog Voltage: voltage command signal 0 - 10 V.
•
Analog Current: current signal 4 - 20 mA.
The choice between the two models must be made when ordering the regulator.
The configuration of some features of the Series PRE electronic pressure regulator is done
through the UVIX supervision software.
Two operating modes have been implemented:
•
Automatic: the pressure target is set via the analog input. At startup the Regulator is in this
mode.
•
Manual: the pressure target is set using the function keys or through a special command of
the UVIX supervision software. The regulator must be set in this mode during the
configuration phase in order to avoid unwanted pressure adjustments.
•
In addition, using the NFCamApp app it is possible to configure the parameters of WiFi
communication (only for models that provide for WiFi communication) and view some
features of the PRE series electronic pressure regulator.
