Operation and maintenance instructions
Series PRE proportional pressure regulator
External sensor version
5000056022
Ver. 00
22
COMMANDS
In this section it is possible to send a new command to the device or to check the history of the
commands sent.
If the device is in the Automatic operating mode, the only command that can be sent is "Start
manual mode" which allows the activation of the Manual operating status.
If the Manual operating mode is activated on the device, it is possible to send the following
commands:
•
End manual mode: which allows to activate the Automatic operating mode.
•
Set Pressure: the target pressure value is set viathis command.
