Series 6E electromechanical cylinders
9
EN
8
10
11
12
14
6
5
7
STEP 3
Assemble the motor flange (
11
), in case provided, to the adapter (
8
),
using the appropriate centring. Put the flange-adapter interface seal
(
10
) in between in case of IP65. Block the motor flange (
11
) with the
screws (
12
) provided.
STEP 2
Assemble the adapter (
8
) on the rear side of the Series 6E
electromechanical cylinder (
1
) using appropriate centering.
In case of IP65, make sure to put the rear end cap seal (
2
) in between
the support bracket (
3
) and the housing (
8
). Secure with the screws (
9
)
provided.
STEP 4
After having adequately positioned the electric motor (
14
), position
the remaining half coupling (
6
) onto the motor shaft and secure with
the screw (
7
) provided as indicated in the section “Flexible coupling
assembly”. In the end, insert the elastomeric coupling (
5
).
STEP 5
Assemble the motor unit (
14
) with the cylinder unit using appropriate
centering, paying attention to coupling the half couplings.
In case of IP65, put the motor seal (
13
) in between the motor unit and the
cylinder unit. Secure the motor unit with the screws (
16
) provided with the
relative washers (
15
) in case supplied.
1
2
8
9
3
13
14
15
16
Содержание 6E Series
Страница 1: ...USE AND MAINTENANCE MANUAL SERIES 6E ELECTROMECHANICAL CYLINDERS...
Страница 19: ......
