Camozzi 6E Series, Руководство по эксплуатации и обслуживанию

Страница: 7 / 20

Series 6E electromechanical cylinders
7
EN
Furthermore, it is also possible to fix the Series 6E electromechanical
cylinder using the fixing elements as shown below.
• It is forbidden to subject the cylinder rod to torsion due to the torque
of the front accessories.
CAUTION: installation must be carried out so that
the front and rear end caps are not supported.
NO
Available support configurations
Installation of rod accessories
It is possible to fix the Series 6E electromechanical cylinder with the
appropriate supports:
1 - On the front end cap of the Series 6E electromechanical cylinder;
2 - On the rear end cap of the Series 6E electromechanical cylinder,
both in configuration with the motor in line and the motor parallel
(assembly available only for size 32, 40, 50 and 63).
3 - On the cover assembly with the motor parallel.
CAUTION: in case of installing the support in the configuration with parallel
motor, use the screws in the parallel motor kit.