Series 6E electromechanical cylinders
10
EN
11
12
13
14
16
STEP 1
After having adequately positioned the Series 6E cylinder (
1
), position
the seal (
2
) on the rear end cover of the cyllinder (in case of IP65) and,
in case provided, fix the support bracket (
3
) followed by the centering
ring (
4
) on the rear side of the cylinder. Assemble the half coupling
(
6
) on the rear shaft of the cylinder and secure it with the screw (
7
) as
indicated in the section “Flexible coupling assembly”
STEP 3
Assemble the gearbox flange (
13
- in case provided) to the gearbox
(
16
) using the appropriate centring. Put the gearbox interface seal (
14
)
in case of IP65. Secure the gearbox flange (
13
) with the screws (
11
)
provided and the relative washers (
12
) if provided.
STEP 2
Assemble the adapter (
8
) on the rear side of the Series 6E
electromechanical cylinder (
1
), using appropriate centring. In case of
IP65, make sure to put the rear end cover seal (
2
) in between the support
bracket (
3
) and the adapter (
8
). Secure with the screws (
9
) provided.
Installation with gearbox in line
3
2
8
9
1
3
4
7
6
1
2
7
1
2
2
3
4
6
5
6
8
9
10
11
12
13
14
15
16
1
Series 6E electromechanical cylinder
2
Rear end cap seal
3
Support Bracket
4
Guide ring
5
Elastomeric coupling
6
Half coupling
7
Half coupling screw
8
Adapter
9
Adapter screw
10
Adapter-Flange interface seal
11
Gearbox screw
12
Washer
13
Gearbox flange
14
Gearbox seal
15
Gearbox flange screw
16
Gearbox
Содержание 6E Series
Страница 1: ...USE AND MAINTENANCE MANUAL SERIES 6E ELECTROMECHANICAL CYLINDERS...
Страница 19: ......
