14
Firmware Update
To get the most out of your camera, install the latest software
(Firmware).
The firmware version of your camera is shown in the
system settings.
Download the ZIP file from our
homepage first.
Unzip the file on the main root
of the memory card. Enter the
system settings of the camera
and choose Firmware Update -
> "Yes" and confirm with the
“Play”- button.
This process takes about 1 minute. The display shows the procedure.
Do not turn off the cam while updating!
Make sure that the battery is fully charged.
Technical Data
Operating Voltage:
5V (USB) / 3,7V (LiPo-Battery, 900mAh)
Consumption:
250 - 450mAh (depending on camera settings)
Size:
49 x 42 x 34mm
Weight: 88g
incl.
battery
Battery: 3,7V
900mAh
LiPo
Format:
MPEG4, AVI or MOV
Sensor: 5MPix
CMOS
Lens: 170°
(exchangeable)
Zoom:
digital 4times (only NTSC)
Screen:
1,5“ / 38mm TFT
Microphone:
yes (Mono, 48 kHz)
AV-Output:
yes, via USB-10 Pin
USB: Hi-Speed
USB
(2.0)
HDMI: yes,
1.2
Interface:
Open Connector Board (OCB, bottom of the cam)
Remote:
yes, LinX-System 2,4 GHz (optional)
Operating-/Storagetemp.: -10°C till 60°C
Memory:
Micro SD/SDHC-<= 32GB – Class 4 or higher
2 slots for cards with 32GB each
White balance:
automatically
