Camille Bauer 175267, Руководство пользователя

Страница: 24 / 33

PM 1000288 000 00 Device handbook SIRAX BT5100 24/32
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
O/P 2
O/P 2
*
O/P 2
*
O/P 2
*
O/P 2
*
O/P 2
Pressing the “ Down” key will enter the “New/Change Start value of the Output 2 edit” mode.
Pressing “ Up” key will confi rm the present value as Start value of the Output 2 and advance to the Elbow
value of Output selection (section 7.1.6.2.3) or exit setup menu.
New / Change Start value of the Output 2
(*Denotes that digit will be fl ashing).
Pressing the “ Down” key will not aff ect the value of fi rst digit, it is always 0.
Pressing the “ Up” key will advance the operation to the next digit and set the fi rst digit, in every case to
“0”.
Enter New / Change Start value of the Output 2, fi rst digit entered, prompting for second digit. (*Denotes that
digit will be fl ashing).
Pressing the “ Down” key will scroll the value of the second digit from 0 through to 9, the value will wrap
from 9 round to 0,if fi rst digit is 0.
Pressing the “ Up” key will advance the operation to the next digit and set the second digit, in this case to
“1”.
Enter New / Change Start value of the Output 2, second digit entered, prompting for third digit. (*Denotes
that digit will be fl ashing).
Pressing the “ Down” key will scroll the value of the third digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “ Up” key will advance the operation to the next digit and set the third digit, in this case to
“0”.
Enter New / Change Start value of the Output 2, third digit entered, prompting for fourth digit. (* denotes that
digit will be fl ashing).
Pressing the “ Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0.
Pressing the “ Up” key will advance the operation to the “New / Changed Elbow value of the Output 2”
and set the fourth digit, in this case to “0”.
New/changed Start value of the Output 2 confi rmed
Pressing the “ Down” key will re-enter to the “New / Change Start value of the Output 2”.
Pressing the “ Up” key will confi rm New Start value of the Output 2 and advance to the Elbow value of
Output selection (section 7.1.6.2.3) or exit setup menu.
7.1.6.2.2 Start value of output 2
This screen allows the user to set the Start value of Output 2 (considerd as DC Voltage). Start value of Output can be set up to 20% of set End
value of Output.