Camille Bauer 175267, Руководство пользователя

Страница: 22 / 33

PM 1000288 000 00 Device handbook SIRAX BT5100 22/32
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
ON O/P1 O/P2 COM
O/P 1
A
O/P 1
A
*
O/P 1
A
*
O/P 1
A
*
Enter New / Change Elbow value of the Output 1, fi rst digit entered, prompting for second digit. (*Denotes
that digit will be fl ashing).
Pressing the “ Down” key will scroll the value of the second digit from 0 through to 9, the value will wrap
from 9 round to 0depending on the set End value of Output.
Pressing the “ Up” key will advance the operation to the next digit and set the second digit, in this case to
“1”.
Enter New / Change Elbow value of the Output 1, second digit entered, prompting for third digit. (*Denotes
that digit will be fl ashing).
Pressing the “ Down” key will scroll the value of the third digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on the set End value of Output.
Pressing the “ Up” key will advance the operation to the next digit and set the third digit, in this case to
“0”.
Enter New / Change Elbow value of the Output 1, third digit entered, prompting for fourth digit. (* denotes that
digit will be fl ashing).
Pressing the “ Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on the set End value of Output.
Pressing the “ Up” key will advance the operation to the “New / Changed Elbow value of the Output 1”
and set the fourth digit, in this case to “0”.
New/changed Elbow value of the Output 1 confi rmed.
Pressing the “ Down” key will re-enter to the “New / Change Elbow value of the Output 1”.
Pressing the “ Up” key will confi rm New Elbow value of the Output 1 and advance to the Output 2 para-
meter selection(section 7.1.6.2).
ON O/P1 O/P2 COM
O/P 2
Pressing the “ Down” key will enter the “New/Change End value of the Output 2 edit” mode.
Pressing “ Up” key will set the present value as End value of the Output 2 and advance to the Start value
of Output selection (section 7.1.6.2.2).
7.1.6.2 Output 2 parameter selection
7.1.6.2.1 End value of output 2
This screen allows the user to set the End value of Output 2 (considerd as DC Voltage). The End value of Voltage Output can be set up to 10V.