Cameron CVC-1070, Руководство пользователя

Страница: 14 / 16

14
Your appliance is equipped with a fabric dust bag. If you notice that the
vacuum cleaner seems to be less efficient than usual check the dust indica-
tor by selecting the maximum power and lifting the cleaning tool off the
floor. If it turns red, change the bag.
To change the dust bag, turn off the appliance and unplug it. Lift up the
catch to gain access to the dust bag compartment and raise the cover, Pull
the handle up to remove the bag holder, Hold the bag upside down to re-
lease into bin Please be careful so that it does not overturn, Do not forget
to regularly clean the dust bag and filter. The efficiency of your cleaner and
the life of the motor depend on it.
Clean the vacuum cleaner body with a damp cloth.
Do not use any abrasives.
Change of Filters
MOTOR PROTECTION FILTER
The filter is located in the dust
bag compartment and protects
the motor from dust. To reach
this filter lift up the grill which
secures it and replace it with a
new one after emptying the dust
bag 5 times
Attention:
Do not use the vacuum cleaner
without the motor protection fil-
ter.
AIR OUTLET FILTER
Filters the air which is expelled.
Pull on its holding clip to take it out of its housing. When fitting the new
filter, make sure to secure it correctly with the clip. Replace it after every
5 dust bag emptying.
MAINTENANCE