Cameron CVC-1070, Руководство пользователя

Страница: 12 / 16

12
Assembling the appliance
This appliance is designed for vacuuming small households.
Before first use, please ensure that all the fitters are installed correctly.
This model is equipped with an infra- red remote control, hence please
follow the instructions.
Extend the chrome tube to the desired length by pressing on the button
and pulling the tube apart.
To attach the flexible hose to the vacuum cleaner, push the end of the
pivoting head on the flexible hose into the attachment point of the vac-
uum cleaner. Make sure that the plug is correctly inserted into the socket
To remove the flexible hose from the vacuum cleaner, press on the two
buttons situated on either side of the pivoting head then pull upwards to
remove it from the attachment point.
Any of the accessories can be fitted onto the end of the tubes.
Pull the mains lead out to the desired length and plug it into a standard
domestic outlet. If the supply cord is damaged, it most be replaced with
another made by the same manufacturer or take it to an authorized
service center, The cable must be managed and routed so as to avoid
tripping hazard during use.
Press the foot pedal to start the vacuum cleaner. To stop it, press the
pedal again.
The floor accessory has two positions:
HARD FLOOR (tiles, parquet floors, etc,) position - The cleaning tool’s
brush must be in the lower position, Press on the rocker switch to lower
it.
CARPET OR RUG position - The cleaning tool’s brush should be raised,
Press the rocker switch to lift the brush up. Only the flat part of the tool
is in contact with the floor.
Using the Remote Control
USING TIE CONTROLS
The Remote Control handle operates by infra-red You can use it to turn
the vacuum on and off and control the suction by use of the Min., Max.
and Auto buttons. This gives you fingertip control for different applica-
tions.
REPLACING THE BATTERIES
If the function of the remote control starts to fail, this is generally an
indication the batteries need replacing. Hold the end of the handle and
open the battery cabinet. Press the spring in the battery cabinet and take
it out gently.
Repeat the process to remove the old battery, Replace with the new bat-
tery.
HOW TO USE YOUR VACUUM CLEANER