background image

Important Safety Information

Symbols and Terms Used in this Manual

!

   WARNING: 

This symbol identifies information about practices or circumstances that can lead to per

-

sonal injury or death, property damage, or economic loss.

CAUTION:   Indicates actions or procedures which if not performed correctly may lead to personal 

injury or incorrect function of the instrument or connected equipment.

Important:  Indicates actions or procedures which may affect instrument operation or may lead to an 

instrument response which is not planned.

This product must be operated within the parameters stated in this manual and in conjunction with 

the ratings printed on the product serial tag.

Technical Support Contact Information

Cameron

Measurement Systems Division

14450 John F. Kennedy Blvd.

Houston, TX 77032

Phone: 1-800-654-3760; 281-582-9500

Fax: 281-582-9599

Clif Mock is a trademark of Cameron International Corporation (“Cameron”).

© 2013 Cameron International Corporation (“Cameron”). All information contained in this publication is 

confidential and proprietary property of Cameron. Any reproduction or use of these instructions, drawings, or 

photographs without the express written permission of an officer of Cameron is forbidden.

All Rights Reserved.

Printed in the United States of America.

Manual No. 2350754-01, Rev. 02 

September 2013

Содержание CLIF MOCK CD-20SFA













Отзывы: