N10316;9/36
- 9 -
●
Scanning mode
Scanning mode
ON
OFF
Normal scan
1/2 Partial scan
1/4 Partial scan
Variable partial scan
Blanking compression
Communi cation command
：
H'10
Scanning mod e
Communi cation command
：
H'11
Binning scan (2-lines addition)
Communi cation command
：
H'10
ON
OFF
ON
OFF
ON
OFF
ON
Make sure th at "Blanking compression" is
set "ON" wh en in parti al scanning
Scanning mode
Blanking
compression
Binning scan (2-lines addition)
Normal scanning
OFF
Factory default
The sensitivity is increased and the
frame rate is doubled by adding up
vertical two lines.
ON
It is to transfer blanking in high speed
and to compress it, it is set when it is
needed to make the frame rate faster.
1/2 partial scanning
ON
The partial scanning of the vertical width
of
the
longitudinal
picture
area
corresponds to one-half of the central
portion of the image pickup area
1/4 partial scanning
ON
The partial scanning of the vertical width
of
the
longitudinal
picture
area
corresponds to one-quarter of the
central portion of the image pickup area
Variable partial scanning
ON
It is possible to conduct partial scanning
of any area by setting starting line and
effective line numbers.
(Note) In case of variable partial scanning, line numbers for partial scanning in continuous shutter mode
must be 20
lines or more. Meanwhile, a minimum of one line scanning is possible in asynchronous shutter mode.
Dummy line is output when performing one line scanning, and the second line makes an effective line.
1/2 Partial scan
Full frame area
1/4 Partial scan
Variable partial scan
Starting
line
Effective lines
127LI NE
Image output area
Image output area
36 9
9
L I NE
19 7LIN E
30 0LIN E
Full frame area
Full frame area
