6
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
5
LC DISPLAY
The 2-line LC display with background illumination displays the mode currently active (main screen), the menu options in the options menu,
and the numerical values or operating mode in certain menu options. If the DMX input is not receiving a control signal, the numbers on the
display will flash; this flashing stops as soon as a control signal is present (DMX and Slave mode).
6
CONTROL BUTTONS
MODE:
Select MODE in order to access the options menu. Similarly, pressing MODE in the menu structure in the options menu and
submenus will take you one level higher to the main display (press several times if necessary).
ENTER:
In the options menu, press ENTER to access the menu level where you can change values. Press ENTER to confirm value changes
as well.
UP
and
DOWN:
Select the individual menu items in the options menu (device settings, operating mode, etc.) and submenus, and change the
value of a menu item such as the DMX address.
INSTANT FOG:
Press and hold the MODE and UP buttons at the same time in order to manually start the maximum fog discharge. Release
the buttons to stop the fog discharge again.
7
FLUID HOSE
Hose to connect to the special Cameo canister cover (included in delivery).
8
FOG OUTLET NOZZLE
Caution, hot! When setting up the fog machine, note the instructions under
“CAUTION!” IMPORTANT INFORMATION ON FOG MACHINES!”
in the safety information of these instructions.
9
VENTILATION SLITS
To prevent overheating the device, ensure that the ventilation slits are not covered and that air can circulate freely.
11
10
13
12
16
14
15
CANISTER COMPARTMENT AND SPECIAL COVER FOR CANISTER