Cameo CFP-200, Руководство оператора

Страница: 12 / 36

＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞
Aidite | 08
Chapter 2 Safety Maintenance and Precautions
2.1 Installation location
The furnace shall be installed in a dry room, and not
less than 30cm distant from the wall. The distance
between the two furnaces shall be more than 50cm to
ensure safety and heat dissipation.
When the temperature is lower than 15 ℃ (for example,
after handling), let the furnace sit at room temperature
for 30 minutes before starting.
Attention shall be paid to the heat resistance of the
platform for placing the furnace. The thermal radiation
and thermal effect released by the furnace are within
the range of no damage, but it does not exclude the
drop of high-temperature objects caused by improper
operation, resulting in slight color change of the
working platform.
Inflammables are strictly prohibited around the
furnace.
2.2 Idle mode
When the furnace is in the idle mode, make the working bench return into the furnace and turn off the
main switch.
Close the furnace to protect thermal insulation of the furnace and prevent moisture absorption.
2.3 Installation and use
Non-professionals are forbidden to dismantle this furnace.
Unpack the box, take out the porcelain furnace, place it on a flat and stable table, install it in a clean and
ventilated environment, and check its accessories, especially if the firing platform and firing plate are
damaged.
The power supply for the porcelain furnace must be grounded. Check if its power supply is connected
before starting up, carefully read this manual, and check if there are any packages left in the furnace, and
if the vacuum pump is reliably connected with the furnace.
Place the firing platform in the middle of the tray.
Chapter 2 | Safety Maintenance and Precautions