DRAFT 02
IMPORTANT! Do not power wash any part of the KING OmniPro antenna head or base mount.
LIMITED WARRANTY
All trademarks are the sole property of their respective owners.
Every new KING OmniPro Antenna System Model 053225 and 053226 is thoroughly inspected and tested before leaving the factory,
and is covered by the following limited warranty from the date of original purchase:
•
Two-year parts warranty: The customer is not responsible for the cost of replacement parts if the original part is determined to
be defective under the terms of the warranty. The customer is responsible for the cost of replacement parts after two years.
•
One-year labor warranty: The customer is not responsible for labor costs to repair unit if unit falls under the terms of the
warranty. Any warranty labor outside of that performed at the factory is not covered unless the product has been installed by
an authorized dealer/installer or OEM manufacturer. The customer is responsible for all labor costs after one year.
Should any trouble develop during the warranty period, contact the Australian/New Zealand distributor, Camec, before the warranty
period expires. If a fault covered by the warranty occurs, the Purchaser must
fi
rst contact Camec.
Contact with Camec may be made in any of the following ways:
• Australia: (a) Phone 1300 654 936, (b) Fax 03 9799 4476, (c) Email: [email protected]
• New Zealand: (a) Phone 64 9 257 2419, (b) Fax 64 9 255 1910
Any warranty claim from the Purchaser must be accompanied by:
• Proof of purchase
• Return of the product, and
• Full details of the alleged defect.
The cost of delivery and insurance of the Product to and from Camec and the cost of testing the Products are the responsibility of the
Purchaser.
This warranty does not cover installation and external wiring, or remanufactured units. This warranty is not transferable from the
original owner.
This warranty does not apply where:
• The product has been abused, misused, improperly installed or improperly maintained.
• The product has been used with an accessory other than a KING accessory designed for the product.
• Repairs have been made or attempted by others that are not certi
fi
ed by Camec to do such repairs.
• Repairs are required because of normal wear and tear.
• Alterations have been made to the product.
• The product or any associated component has been opened without authorization or disassembled to any degree.
• Damage has been caused by power washing.
• Circumstances beyond the control of Camec cause the product to no longer operate correctly.
• Customer is not the original owner.
In no event shall Camec be liable for any indirect, incidental, or consequential damages from the sale or use of the product. This
disclaimer applies both during and after the term of the warranty. Camec disclaims liability for any implied warranties, including implied
warranties of “merchantability” and “
fi
tness for a speci
fi
c purpose,” after the term of the warranty.
Camec Pty Ltd - 47-63 Remington Drive, Dandenong South Victoria, Australia
Phone: 1300 654 936 Fax: 03 9799 4476
www.camec.com.au
Camec NZ Ltd - 44 Montgomerie Road, Mangere Auckland, New Zealand
Phone: 64 9 257 2419 Fax: 64 9 255 1910
www.camec.co.nz
Distributed by
© 2023 KING Manual 24402 Rev A
