DRAFT 02
Keep in mind the following when installing the Wall Mount Power Inserter:
• Can be mounted in most standard electrical boxes.
•
Requires a +12 Volt DC power source. (Inadequate voltage may cause the green LED to not illuminate and the unit to not
function properly.
• Requires .25” female spade connectors for power and ground connections.
• Has an internal fuse rated @ 400 mA max. If tripped, the fuse will reset when the circuit cools.
• Is not an ampli
fi
er. No devices other than those shown below should be connected (unless approved by KING).
IMPORTANT!
When making connections, make sure
there is no power to the +12VDC and
ground lines, and the power inserter is
turned o
ff
(button not depressed).
POWER INSERTER INSTALLATION
ABOUT THE POWER INSERTER