CAME ZL19N, Руководство по установке

Страница: 4 / 16

1
2
3
4
5 21
22
23
17
12
13
20
18
6
7
8
11
14
15
16
19
10
9
ENGLISH
P.
44
-
M
an
u
al
c
od
e:
31
9
U
3
3
31
9
U
3
3
ve
r.
1.
0
1.
0
05
/2
0
11
© C
A
M
E c
an
ce
lli auto
m
ati
ci
s.p.a. - T
h
e d
ata a
n
d i
nf
or
m
ati
on
in
th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny tim
e a
n
d w
ith
ou
t o
b
lig
ati
on
o
n th
e p
art of C
am
e C
an
ce
lli A
uto
m
ati
ci
S
.p.a. to n
otify s
ai
d c
h
an
g
es.
4.2 Main components
Warning! Before acting on the eqipment, cut off the main power supply and disconnect
the emergency batteries (if present).
Before beginning to install, the following is necessary:
• Check that the fastening point of the control panel is protected from accidental impacts, and that the surfaces used for fastening are
solid, and that the fastening is done with proper screws, plugs.
• Set up a suitable omnipolar cut-off device, with distances greater than 3 mm between contacts, with sectioned power source
• Check that any connections inside the container (made for continuity purposes of the protective circuit) are fi tted with extra
insulation compared to other internal conductive parts.
• Set up proper conduits and electric cable raceways, making sure these are protected from any mechanical damage.
5 Installation
5. 1 Preliminary checks
Transformers 1.
Speed adjuster connectors 2.
Terminal board for connecting the 3.
002LB18 card (if unused, make sure that
bridges are connected among A-B;C-D;
E-F; G-h)
Accessories fuse 4.
Card fuse 5.
Amperometric sensitivity during travel 6.
adjustment trimmer
Amperometric sensitity during travel 7.
adjustment trimmer
Amperometric sensitivity during 8.
slowdown adjustment trimmer
Opening / closing strike zone adjustment 9.
trimmer
Automatic closing adjustmet trimmer 10.
M2 closing delay adjstement trimmer 11.
10-Dip switch selector function 12.
LED to signal radio code/ ACT counter 13.
Code memorising buttons 14.
Selection jumper B1-B2 / cycle lamp 15.
Radio frequency card socket 16.
Line fuse 17.
Connection terminals 18.
4-Dip switch function selector 19.
Selection jumper for command type for 20.
button on 2-7
Electro lock fuse 21.
M1 motor fuse 22.
M2 motor fuse 23.
Installation must be carried by skilled, qualified technicians in accordance with current regualtions.