CAME Twister, Руководство по установке, Страница: 27 / 64

SENSOR 2
12 :30
SENSOR 1
1
2
1
2
p.
1111
- M
an
u
al
:
F
A
0
0
6
1
3
-E
N
FA
0
0
6
1
3
-E
N
v.
1 1
- 1
1/
2
0
1
6 - © C
A
M
E S
.p.
A
. T
h
e d
ata a
n
d i
nf
or
m
ati
on i
n th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny ti
m
e a
n
d w
ith
ou
t n
oti
ce
.
Arm drop function
PST004 PST004
In the event of a power failure, the
horizontal arm drops to free the
passage. Lift the arm and reset it after
power has been restored.
Securing the side casings
⚠
Make sure that the hydraulic damper is correctly adjusted (see specific chapter).
Fit the side casings and secure with the screws.
Move the cover close and connect the plate to the direction arrow with display.
The functions can be programmed using the contro panel keyboard and Master card.

All unused N.C. contacts must be shorted.
Display that shows the functions and settings assigned using the programming
keys or transponder.
The
< >
are used to navigate between menu items and increase/decrease a value.
The
ESC
key is used to exit the menu and cancel the changes.
The
ENTER
key is used to enter the menu and confirm/memorise the value set.
Transponder used to add, change and confirm the functions via Master card
without opening the turnstile.
Move the Master card near the transponder reader and enter the settings desired.
SENSOR 1
Transponder used to confirm the functions and settings(ENTER).
SENSOR 2
Transponder used to modify, increase or decrease a value (< >).
PROGRAMMING
SENSOR 2
SENSOR 1