CAME PXWKTN01, Руководство пользователя

Страница: 8 / 16

Pa
g.
8
-
FA
004
92
M
4A
v.
1
0
2/
20
17 ©
Ca
m
e S
.p.
A.
Menu items Values

MAX. BRIGHTNESS
STATE LED
[*]
->
[-] ▌▌▌▌▌▌ [+]
<-
[#]
[▲] [▼]

MIN. BRIGHTNESS
KEYPAD
[*]
->
[-] ▌▌━ ━ ━ ━ ━ [+]
<-
[#]
[▲] [▼]

MAX. BRIGHTNESS
KEYPAD
[*] ->
[-] ▌▌▌▌━ ━ [+]
[▲] [▼]

MIN. BRIGHTNESS
DISPLAY
[*]
->
[-] ━ ━ ━ ━ ━ ━ [+]
<-
[#]
[▲] [▼]
M
MAX. BRIGHTNESS
DISPLAY
[*] ->
[-] ▌▌▌▌▌▌ [+]
<- [#]
[▲] [▼]
N
CONTRAST
DISPLAY
[*]
->
[-] ▌▌▌▌▌▌▌▌━ [+]
<-
[#]
[▲] [▼]
Legend:
[▲] [▼]
to move from one item to another in the menu; [*] [#] to enter and exit
the selected item; [-] [+] to change values.
Notes.
1
Changing the keypad menu language does not change the control unit language. The
two languages must be the same.
3
For the control unit to learn the keypad, the control unit must also be on the keypad’s
learning screen. Once the self-learning is done, the display will read the keypad number,
for example, No.–– SN.XXXXXXXX (SN stands for the manufacturer’s 8-digit serial number)
4
When the active cleaning function is operating, the keypad remains disabled for 30
seconds. The display shows the countdown in seconds. Once elapsed, the device returns
to the previous menu’s level.
E
The condition of the [TAMPER] contact can be changed within 4 minutes of the first
turning-on, or of resetting the device.
Once this time has elapsed, the value is displayed between the characters # (
#ENABLED# )
to show that the change has been disabled. The tamper contact’s changed condition can
be restored, by either resetting the device, or by keeping pressed for more than 5 seconds
the 0 key. Again, it remains enabled for 4 minutes.
7
It is for setting the waiting time, from 5 to 30 seconds. The default time is 10 seconds,
before going to minimum brightness; this time remains whenever the proximity sensor is
activated or a key is pressed.
8
-
M
* These parameters adjust the intensity of the keypad’s, the display’s and state
LEDs’ brightness. These can be either off, on, bright or subdued. When off, if your hand
approaches the proximity sensor, the keypad switches to the minimum, set brightness.
Once the set time elapses (see the ‘DISPLAY TIME ON’ menu), it reduces the set brightness
to a minimum. After another 5 seconds, the keypad switches off.
This product complies with the law.
Decommissioning and disposal. Dispose of the packaging and the device at the end of its life cycle
responsibly, in compliance with the laws in force in the country where the product is used. The recyclable
components are marked with a symbol and the material's ID marker.
THE DATA PRESENTED IN THIS MANUAL MAY BE SUBJECT TO CHANGE, AT ANY TIME, AND WITHOUT NOTICE.
MEASUREMENTS, UNLESS OTHERWISE STATED, ARE IN MILLIMETERS.