9
-
FA
004
70
M
4A
v.
1
01
/2
01
7 ©
Ca
m
e S
.p.
A.
Menu items
Values
5
BRIGHTNESS
DISPLAY
[*]
->
[-]
▌▌▌▌▌▌▌━
[+]
<-
[#]
[▲] [▼]
F
LIGHTING
KEYPAD ON
[*]
->
[-] ▌▌▌▌▌▌▌▌▌━ [+]
<-
[#]
[▲] [▼]
G
LIGHTING
STANDBY KEYPAD
[*]
->
[-] ▌━ ━ ━ ━ ━ ━ ━ ━ ━ [+]
<-
[#]
[▲] [▼]
BRIGHTNESS
STATUS LED
[*]
->
[-]
▌▌▌▌▌▌▌━
[+]
<-
[#]
[▲] [▼]
BUZZER
[*]
->
[-]
ENABLED/DISABLED
[+]
<-
[#]
[▲] [▼]
KEY MODE
WAKEUP
[*]
->
[-]
VALID/
NOT VALID
[+]
<-
[#]
[▲] [▼]
KEYPAD CLEANING
[*]
->
[-]
30 s
[+]
[▲] [▼]
KEYPAD VERSION
[*]
->
[-]
CAME
v.X.YY BUILDN
[+]
<-
[#]
[▲] [▼]
Legend:
[▲]
[▼]
to move from one item to another in the menu; [*] [#] to enter and exit the
selected item; [-] [+] to change values.
Notes.
1
The keypad language follows the system (control unit) language. So if you change the
control-unit language, the keypad language will also change. However, two languages can
be used by setting the language in the local menu that is only found on the keypad. (default:
ITALIAN)
2
[KEYPAD ADDRESS]
it can be changed within 4 minutes from the first launch or when
resetting the device. Once this time has elapsed the value appears among the # (#03#) char-
acters to show that the change has been disabled. These changed values can be restored,
by either resetting the device, or keeping pressed for more than 5 seconds the 0 key. Again,
it remains enabled for 4 minutes.
3
The condition of the
[TAMPER]
can be changed within 4 minutes from the first booting
or resetting of the device.
Once this time has elapsed the value is shown among the #
(
#ENABLED# ) characters to
show that the change has been disabled. The tamper contact’s changed condition can be
restored, by either resetting the device, keeping pressed for more than 5 seconds the 0 key.
Again, it remains enabled for 4 minutes.
It shows whether the first key pressed when the keypad is in STANDBY status should be
considered valid or not.
When the active cleaning function is operating, the keypad remains disabled for 30
seconds. The display shows the countdown in seconds. Once elapsed, the device returns to
the previous menu’s level.
This product complies with the law.
Decommissioning and disposal.
Dispose of the packaging and the device at the end of its
life cycle responsibly, in compliance with the laws in force in the country where the product
is used. The recyclable components are marked with a symbol and the material's ID marker.
THE DATA PRESENTED IN THIS MANUAL MAY BE SUBJECT TO CHANGE, AT ANY TIME, AND
WITHOUT NOTICE. MEASUREMENTS, UNLESS OTHERWISE STATED, ARE IN MILLIMETERS.
